CAPCELL PAK ADME-HR 100Å 2µm 50x2.1mm (U)HPLC Column

Part Number: OS-93301
Manufacturer: Osaka Soda
|
Delivery Time: approx. 7 days
Excl. 19% taxes, excl. Shipping costs
Packaging unit: 1 pc, Minimum order quantity: 1 pc
Product Line

Questions, MSDS, CoA?

Do you have any questions? Give us a call or send us an email!

Product Description

The Capcell Pak ADME-HR HPLC column 50x2.1mm, 2µm, carries an adamantyl phase (ADME) on polymer-coated silica with 10 nm pores and operates in the pH range 2 to 9. Instead of a linear alkyl chain, a cage-shaped adamantyl framework is attached to the surface, whose surface coverage is intentionally limited to allow its intrinsic selectivity to take full effect. Compared with the brand’s octadecyl phases, this results in a different balance of hydrophobicity and polarity and thus an orthogonal separation, while the column remains stable even with fully aqueous acidic eluents. Documented are nucleic acid bases and nucleosides in gradient mode as well as biogenic amines under fully aqueous eluents, and with over one hundred application notes the application base is extensive.

Features and Benefits

  • Silica support coated with a silicone polymer film
  • Alkyl groups bound only to the polymer layer
  • This allows for a wide pH range up to pH 12
  • Low-metal silica for complex-forming analytes
  • Over forty phases, ranging from C18 to size-exclusion

Additional Notes

Capcell Pak employs a unique design principle, which the manufacturer refers to as the “capsule type.” The silica support is not silanized directly; instead, it is first coated with a uniform, thin layer of silicone polymer, and the functional groups are bound only to this layer. In this way, the brand solves a fundamental problem in reverse-phase chromatography: Conventional octadecyl phases hydrolyze in alkaline conditions even after end-capping, causing the silica support to dissolve, whereas purely polymeric phases exhibit lower separation efficiency, lower compressive strength, and swelling behavior. The polymer layer therefore replaces end-capping and is the reason for the brand’s wide pH ranges. The silica is also tested for its metal content, which is essential for complex-forming analytes. The individual phases can be plotted on a diagram of hydrophobicity versus surface polarity, which serves as the key to phase selection within the brand.

Legal Information

Capcell Pak is a product line of Osaka Soda Co., Ltd., Osaka, Japan. The product and phase names listed are part of the manufacturer's chromatography portfolio.

Product Specification

Brand CAPCELL PAK
Product Type (U)HPLC Column
Length 50 mm
Internal Diameter 2.1 mm
Particle Size 2 µm
Chemistry ADME
Chemistry Producers Term ADME-HR
Pore Size 100 Å
Carbon Load 12.0 %
Bet Surface Area [m2/g] 310.0
Country of Origin Japan
Column Type Analytical Column
Base Material Polymer-coated
Hardware Material Stainless Steel
Hardware Type Ready-to-use Column
pH Minimum 2.0
pH Maximum 9.0
Mode of Separation Reversed Phase Chromatography (RP)
Technology U(H)PLC
Matrix Silica
Particle Morphology spherical, fully porous
Pressure Stability 1000 bar

Support - Downloads