CAPCELL CORE AQ 160Å 2.7µm 100x2.1mm CoreShell Column

Part Number: OS-51165
Manufacturer: Osaka Soda
|
Delivery Time: approx. 7 days
Excl. 19% taxes, excl. Shipping costs
Packaging unit: 1 pc, Minimum order quantity: 1 pc
Product Line

Questions, MSDS, CoA?

Do you have any questions? Give us a call or send us an email!

Product Description

The Capcell Core AQ HPLC column 100x2.1mm, 2.7µm, carries a heptacosyl modification (C27) on a polymer-coated core–shell particle with 16 nm pores and operates in the pH range 2 to 10 with a pressure limit of 60 MPa. The bonding density is deliberately set so that the column can be operated permanently with fully aqueous eluent without the retention loss typical of reversed phases, while remaining hydrophobic. Compared with the octadecyl modification Capcell Core C18, hydrophobic compounds elute about twice as fast, making polar and non-polar analytes accessible in a single run. Documented are nucleic acid bases and the simultaneous separation of polar and hydrophobic compounds.

Features and Benefits

  • Polymer-coated core-shell particles
  • Separation performance comparable to fully porous sub-2-µm particles
  • Lower backpressure than fully porous particles
  • Silanol effects suppressed by the coating
  • Six selectivities ranging from C18 to HILIC

Additional Information

Capcell Core combines two design principles. The particle consists of a solid core with a thin, porous outer layer, which keeps the diffusion path short and achieves the separation performance of fully porous particles smaller than two micrometers at a significantly lower back pressure. The polymer coating technology from the fully porous sister brand Capcell Pak is then applied to this structure; in this process, the silicate support is first coated with a uniform, thin silicone polymer film and only then functionalized with reactive groups. This suppresses the effect of residual silanols and is the reason for the wide pH ranges compared to other core-shell columns. One point is important to note regarding the method transfer: Due to the solid core, the specific surface area is smaller than that of fully porous particles, so the sample loading must be reduced when using high sample loads.

Legal Information

Capcell Core is a product line of Osaka Soda Co., Ltd., Osaka, Japan. The product and phase names listed are part of the manufacturer's chromatography portfolio.

Product Specification

Brand CAPCELL CORE
Product Type CoreShell Column
Length 100 mm
Internal Diameter 2.1 mm
Particle Size 2.7 µm
Chemistry C27
Chemistry Producers Term AQ
Pore Size 160 Å
Carbon Load 4.0 %
Bet Surface Area [m2/g] 90.0
Country of Origin Japan
Column Type Analytical Column
Base Material Polymer-coated
Hardware Material Stainless Steel
Hardware Type Ready-to-use Column
pH Minimum 2.0
pH Maximum 10.0
Mode of Separation Reversed Phase Chromatography (RP)
Technology HPLC
Matrix Silica
Particle Morphology spherical, solid core, porous shell
Pressure Stability 600 bar

Support - Downloads