CAPCELL PAK C18 AG 120Å 5µm 250x4.6mm HPLC Column

Part Number: OS-12504
Manufacturer: Osaka Soda
|
Delivery Time: please inquire
Excl. 19% taxes, excl. Shipping costs
Packaging unit: 1 pc, Minimum order quantity: 1 pc
Product Line

Questions, MSDS, CoA?

Do you have any questions? Give us a call or send us an email!

Product Description

The Capcell Pak C18 AG120 HPLC column 250x4.6mm, 5µm, bears an octadecyl modification (ODS, RP-18, C18) on polymer-coated silica with 12 nm pores. It is assigned to USP class L1 and operates in the pH range 2 to 10. This series is the first polymer-coated generation of the brand from 1987 and thus its origin. It originated from the surface treatment of powders for cosmetics, which was transferred to chromatographic supports. Manufacture of the Capcell Pak C18 AG HPLC columns has been discontinued. The column was offered in 5 µm with 4.6 and 6.0 mm internal diameter. In addition, semi-preparative formats up to 30 mm internal diameter were available. There is no named successor. Anyone running a current method on this column should consider as a replacement the brand’s other polymer-coated octadecyl phases, such as the much more porous Capcell Pak C18 UG120 or the Capcell Pak C18 MG.

Features and Benefits

  • Silica support coated with a silicone polymer film
  • Alkyl groups bound only to the polymer layer
  • This allows for a wide pH range up to pH 12
  • Low-metal silica for complex-forming analytes
  • Over forty phases, ranging from C18 to size-exclusion

Additional Notes

Capcell Pak employs a unique design principle, which the manufacturer refers to as the “capsule type.” The silica support is not silanized directly; instead, it is first coated with a uniform, thin layer of silicone polymer, and the functional groups are bound only to this layer. In this way, the brand solves a fundamental problem in reverse-phase chromatography: Conventional octadecyl phases hydrolyze in alkaline conditions even after end-capping, causing the silica support to dissolve, whereas purely polymeric phases exhibit lower separation efficiency, lower compressive strength, and swelling behavior. The polymer layer therefore replaces end-capping and is the reason for the brand’s wide pH ranges. The silica is also tested for its metal content, which is essential for complex-forming analytes. The individual phases can be plotted on a diagram of hydrophobicity versus surface polarity, which serves as the key to phase selection within the brand.

Legal Information

Capcell Pak is a product line of Osaka Soda Co., Ltd., Osaka, Japan. The product and phase names listed are part of the manufacturer's chromatography portfolio.

Product Specification

Brand CAPCELL PAK
Product Type HPLC Column
Length 250 mm
Internal Diameter 4.6 mm
Particle Size 5 µm
Chemistry C18 (RP-18, ODS, Octadecyl)
Chemistry Producers Term C18 AG
Pore Size 120 Å
USP Class L1
Carbon Load 15.0 %
Bet Surface Area [m2/g] 300.0
Country of Origin Japan
Column Type Analytical Column
Base Material Polymer-coated
Hardware Material Stainless Steel
Hardware Type Ready-to-use Column
pH Minimum 2.0
pH Maximum 10.0
Mode of Separation Reversed Phase Chromatography (RP)
Technology HPLC
Matrix Silica
Particle Morphology spherical, fully porous

Support - Downloads

Suitable to this

CAPCELL PAK C18 AG 120Å 5µm 10x4.0mm HPLC Guard Cartridges (2 pcs)
Part Number: OS-12410
Excl. 19% taxes, excl. Shipping costs
View
HPLC Guard Holders 10mm
Part Number: OS-12415
€287.00
Excl. 19% taxes, excl. Shipping costs
View